Due to the large amount of orders being processed, some stock levels may occasionally not reflect actual stock levels due to differences in sale processing times. Please call to check availability to avoid disappointment.
Product information "Hobbywing Sensor Harness 400mm for Xerun Brushless Motor"
This sensor cable is available in five different lengths and wiring can be optimally adapted in the vehicle. All the following cable lengths are only the wire lengths (and connector lengths are not included).
…
For EZRUN MAX8-G2 & MAX4-HV
Sensor converter cable with JST connector, suitable for sensored brushless motors (e.g. Ezrun MAX8 G2, MAX4 HV). This cable is characterized by the particularly high water protection (according to the IP67 standard). Caution: No thermal motor protection.…
HOBBYWING RPM SENSOR
This Hobbywing RPM Sensor detects the voltage changes at the wires of brushless motor, and then outputs the RPM signal. This RPM sensor can work with some speed control systems for helicopters. And one of its typical applications is to work as the RPM sensor for V-Bar…
Hobbywing VBAR Connection wire for Platinum 50cm
With the update of the Platinum ESC v4/4.1 from Hobbywing, Mikado's remote control systems are now also supported.
This cable is used to connect a VBar NEO with the corresponding controller.
Thanks to the additionally installed socket, the fan connection is still available.
Cable length: approx.…
Sensor wire "High Flex" 200mm V2
This is our much loved, original 200 mm sensor wire in further improved specification.
Nicely packaged 3 wire strands next to each other and stacked in 2 rows on top of each other, perfectly positioned with a shrink tube, which is not too tight…
HOBBYWING CAPACITOR MODULE "D" FOR CAR ESC (2.1/3.1/10BL60)
This is a replacement Hobbywing Xerun Super Capacitor Module, intended for use with the Xerun series ESC's.
HobbyWing Capacitor Features:
Super low impedance.
Low temperature in working state.
Reduces the RF interference to make the RC model more reliable,
Improves the burst power when the motor starts…
Our standard sensor wires work with any ROAR based ESC and motor. It requires the use of the Castle Sensor Harness when paired with waterproof, sensored-capable Castle ESCs
Features
Compatible ESCs:
Copperhead 10
Mamba Micro X
Mamba X
Mamba Monster X
Mamba Monster X 8s
Mamba XLX2
…
Our standard sensor wires work with any ROAR based ESC and motor. It requires the use of the Castle Sensor Harness when paired with waterproof, sensored-capable Castle ESCs. Compatible ESCs: Mamba Micro X, Mamba X, Mamba Monster X, Mamba Monster X 8s, and Mamba XLX2.
Specs
Accessory Type ESC Accessories
Application Motor Sensor…
Our standard sensor wires work with any ROAR-based ESC and motor. It requires the use of the Castle Sensor Harness when paired with waterproof, sensored-capable Castle ESCs. …