We are now open Sundays 10am till 2pm

Dear Customer, Covid-19 has impacted manufacturing chains, logistics and supply of products in general.
We have not been able to keep inventory accurate on our website at the moment, please call to check availability to avoid disappointment.
Stay Safe.

PRO BALANCER KIT
Balance! The wrong center of gravity (especially tail-heavy), will turn your model from an eagle into a turkey. Just a fraction of an inch change in balance point can make the difference between a solid performer and an airplane you have to fight just to get back down in one piece. Even if you only fly pre-built ARF models, don't overlook this critical step.

Balsa wood is a natural product and the weight of the wood can vary. Together with differences in engine and radio selection, your new ARF model may be far out of balance and needs to be checked.

An out of balance propeller is often the cause of poor engine performance, poor fuel flow (caused by engine foaming), and even radio problems due to excess engine vibration.

With the SIG Pro-Balancer, you can quickly balance your model and propellers from one simple device. The Pro-Balancer will handle nearly every model in your fleet (fuselage widths up to 11") and any size model propeller. The Pro-Balancer uses carbon steel, laser cut SIG plywood, and is equipped with ball bearings so that it will last for years.

Strong, precise, accurate - the SIG Pro-Balancer.

  • Model: SIGSH900
Quick Find
Manufacturers
We Accept
Store Information
Supercheap Hobbies
Shop 3 / 2 Old Coach Rd
Aldinga, SA, 5173
Ph: 08 8311 1151

Opening Hours
Mon - Fri 9am to 5pm
Thursday 9am to 6pm
Saturday 10am to 2pm
Share Product
Share on Facebook Share on Twitter