Due to the large amount of orders being processed, some stock levels may occasionally not reflect actual stock levels due to differences in sale processing times.
Please call to check availability to avoid disappointment.

Result Pages:
View:
ASS1596 FT Thread Locking Adhesive, blue

Team Associated spares are not normally held in stock, they are ordered as needed weekly from our Australian Distributor
If you need your item urgently please call to confirm availability………

Model
ASS1596
ASS1597 FT Tire Adhesive, medium viscosity

Team Associated spares are not normally held in stock, they are ordered as needed weekly from our Australian Distributor
If you need your item urgently please call to confirm availability………

Model
ASS1597
BD23 Scenic Colours

WHILE STOCKS LAST Pack of 5 colour dyes in dropper bottles for Scenic Water and Making Waves. Ideal for making jams, drinks, jellies, custard, and blancmange etc. Techniques (pdf downloads) click on image Making Jams …

Model
DM-BD23
BD67 Looks Like Glass

A super thin, water-based fluid for creating a high gloss, transparent, glass-like finish on clear plastic parts such as clear canopies. Its super thin viscosity retains surface detail and allows parts to be dipped, drained and dry in 2-3 hours.…

Model
DM-BD67
BD68 Ez Epoxy Putty

For rapid customizing of plastic, resin, wood & metal models. This 2-part, fast- curing, epoxy putty will not shrink or crack and is pre-measured and packed for accurate mixing of the two parts. It sets in 10-15 minutes to a tough, lightweight plastic and  unlike many other putties it is easy…

Model
BD68
BD68 Ez Epoxy Putty

Pre-measured 2 part, fast curing expoxy modelling putty for rapid customising of plastic, resin, wood and metal models. Offers easy accurate mixing, 10-15min working time, non-brittle, easily rolled, self supporting qualities and is supplied in a long life foil bag.…

Model
DM-BD68
BSI CA Applicator Fine (24)

Model
BSI322
BSI CA Replacement Tops (12)

Model
BSI312
BSI Clear Insta Sticker Remover

Insta-Clean is ideal for removing price stickers on presents and stickers from windshields and fiberglass boats. Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. Works on glass, cardboard, plastic, fiberglass and everything else Removes sticker residue in minutes Also removes crayon, marker, grease, makeup, and tree sap. …

Model
BSI100H
BSI Extra Fine CA Extender Tips (6) (Sold as 6 Pcs per individua

Long Extra Fine Extender Tip - #302 For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.…

Model
BSI302
BSI Finish Cure Epoxy 20min. 4.5oz ***

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for…

Model
BSI209
BSI IC Gel Ethyl Cyanoacrylate Gel 50grams

IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very…

Model
BSI115
BSI IC-2000 Gel 3/4oz/20gram hang sell card

Ic-2000 is recognized as being the strongest instant glue for non-porous surfaces. Its enhanced shock resistance, strength, and fast bonding make it ideal to use on rubber components. Ic-2000 has found a home in golf Club and speaker repair shops, and is ideal for the carbon composites used in aerospace. Strongest…

Model
BSI117H
BSI IC-2000 Rubber Tough CA 1/2oz 14Grm

IC-2000 is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000 is ideal for the bonding of bulkheads, formers and servo rails to the…

Model
BSI117
BSI IC-Gel Instacure Cyno Gel 20g

IC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE; IC-Gel, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very…

Model
BSI116
BSI IC-LOC Red Permanent Thread Lock (1

IC-Loc™ Red is a medium thickness, high strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-Loc Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-Loc Red™ will maintain its strength up to 490º F.…

Model
BSI-173
BSI Insta-Cure Super Glue CA 1oz

Model
BSI131H
BSI Insta-Cure Super Thin CA 1/2oz

INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs…

Model
BSI101
BSI Insta-Cure Super Thin CA 1oz

INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs…

Model
BSI102
BSI Insta-Cure Super Thin CA 2oz

INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs…

Model
BSI103
BSI Insta-Cure+ Gap Filling 1/2oz

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints…

Model
BSI106
BSI Insta-Cure+ Gap Filling 1oz

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints…

Model
BSI107
BSI Insta-Cure+ Gap Filling 2oz

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints…

Model
BSI108
BSI Insta-Cure+ Pocket CA 3/4oz

Model
BSI133
BSI Insta-Flex Flexible Thin CA (1oz)

INSTA-FLEX flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX does not turn brittle and remains clear, even if accelerated with INSTA-SET. It has superior shock resistance. Although not as thin in consistency as INSTA-CURE, INSTA-FLEX still has good penetrating qualities and…

Model
BSI119
BSI Insta-Set Aerosol 5.9oz ***

Model
BSI155
BSI Insta-Set CA Accelerator 2oz

Model
BSI151H
Result Pages:
Quick Find
Manufacturers
We Accept
Store Information
Supercheap Hobbies
Shop 3 / 2 Old Coach Rd
Aldinga, SA, 5173
Ph: 08 8311 1151

Opening Hours
Mon - Fri 9am to 5pm
Thursday 9am to 6pm
Saturday 10am to 2pm
https://rektorat.lembahdempo.ac.id/account/print/v77slot/ https://rektorat.lembahdempo.ac.id/account/print/bizz77game/ https://techvcsconclave.jntua.ac.in/wp-content/plugins/v77slot/ https://techvcsconclave.jntua.ac.in/wp-content/plugins/bizz77game/ http://203.159.154.241/v77slot/ http://203.159.154.241/bizz77game/ https://www.unvime.edu.ar/v77slot/ https://www.unvime.edu.ar/bizz77game/ http://125.167.13.91/v77slot/ http://125.167.13.91/bizz77game/ v77slot