ARF model jet trainer aircraft for the drive blower with a diameter of 90 mm brushless motor and 8s Li-poly battery suitable as the first "cutting jet".
The fuselage is a classic design with solid celobalsovým coated with a removable cab and covers the underside of the hull to allow access to the blower. Supply "pipe" leading to the blower and exhaust nozzle are laminated.
The wing is symmetrical profile is a two-piece with a classic balsa structure with a rigid cover. Wing is pushed onto the side of the dural tube coupling. The ailerons and flaps are controlled by micro servos mounted in the wing using the short straight rods.
The tail surfaces are balsa; servos to control the rudders are located in the horizontal stabilizer and kýlovce.
Tricycle landing gear consists of the landing gear - kit involves the use of electric drives (not included in the kit); sprung legs with wheels are contained.
The entire surface of the model is covered with iron sheets Oracover.
To drive you need a 90 mm fan with a powerful AC motor with a thrust of at least 4 kg and 8-12s Li-poly battery.
Kit includes: structural fuselage, wing and tail surfaces covered with iron sheets, sprung undercarriage legs with wheels (without retracting mechanism), a set of small accessories and image guidance.
Margin [mm] 1400
Length [mm] 1540
Wing area [dm 2] 40
Weight [g] 4800 - 5200
controlled functions S, V (2), K (2), M, P (3), F (2), bow leg
Building intensity S2, S3
Difficulty piloting P3
Recommended drive and RC equipment:
MIDI FAN Preceptor
Engine Blowers 90 mm Wemotec MIDI to FAN / HET 650-68-1500
Regulator FOXY XR-120 OPTO HV
battery FOXY G2 2x 14.8 V 5000 mAh in series
Serva 8x HS-85mg
RC rig min. 8 channels