Due to the large amount of orders being processed, some stock levels may occasionally not reflect actual stock levels due to differences in sale processing times.
Please call to check availability to avoid disappointment.

Result Pages:
View:
AIRCRAFT DOPE 250ML CAN

Model
ME651
AIRCRAFT DOPE 500ML CAN

Model
ME654
AIRCRAFT DOPE I LTR CAN

BALSA DOPE   The proper name for dope is Nitrocellulose Lacquer. Dope is used as a clear shrinking liquid to tighten model aircraft tissue and to provide a waterproof, lustrous finish to Balsa wood models. It can be applied directly to Balsa to increase its durability. Unfortunately, it contains volatile chemicals and should…

Model
ME652
BD48 WONDERFILL 240ML

240ml The next generation of strong lightweight fillers for foam and wood. An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated with Foam Armour (BD50)…

Model
DM-BD48
Deluxe Materials Eze-Dope [BD42]

250ml A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper. It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam.…

Model
DM-BD42
Deluxe Materials Eze-Kote [BD37]

Laminating and finishing resin for balsa and foam models. Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy.
Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins.

Coverage: 75ml…

Model
DM-BD37
Deluxe Materials Foam Armour [BD50]

Creates a hard durable surface layer on foam and wood.

A thick water based resin that sets to produce an attractive, durable, scratch resistant coating on foam to prevent dings, wear and disintegration.

It dries to a surface that can be painted and glued easily and will reduce…

Model
DM-BD50
Deluxe Materials Model Lite Balsa Tint [BD6]

240ml pack, Balsa Tint. Strong, lightweight filler which sands easily. Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.  …

Model
DM-BD6
Deluxe Materials Sand 'n' Seal [BD49]

Description: Sand 'n' Seal 250ml A specially formulated wood grain sealer. Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy. Stir well before use. Apply with brush and allow to dry. Sands beautifully after 60 mins. Clean brushes with water. Economical in use. Low odour and…

Model
DM-BD49
Sig Sanding Sealer 16Oz Surface Primer

SIG Sanding Sealer
Creates an ultra-smooth base for a prize winning butyrate dope finish. Quickly fills wood grain and covering materials.

Sanding Sealer is basically our Lite-Coat low-shrink butyrate dope with special light weight, easy-to-sand fillers added that make it the perfect surface primer for a dope finish. Two…

Model
SIGSL004
STIX-IT,HEAT ACT. ADHESIVE 16 OZ

SIG STIX-IT Heat Activated Covering Adhesive Easy to use Saves time Superior adhesion Allows economical covering materials to be iron-on Keeps iron-on plastic & fabric coverings stuck down Strengthens and seals the wood Low weight, one thin brushed-on coat is all that is necessary Cleans up with Sig Butyrate Dope Thinner Compatible with all common model airplane paints Stix-It is…

Model
SIGYSX002
STIX-IT,HEAT ACT. ADHESIVE 8 OZ

SIG STIX-IT Heat Activated Covering Adhesive


ò Easy to use
ò Saves time
ò Superior adhesion
ò Allows economical covering materials to be iron-on
ò Keeps iron-on plastic & fabric coverings stuck down
ò Strengthens and seals the wood
ò Low weight, one thin brushed-on coat is all…

Model
SIGYSX001
TAMIYA LIGHT-CURING PUTTY

Light Curing Putty

Revolutionary Light-Curing Putty to speed-up finishing time!
The Light-Curing Putty will cure in approx. 1 minute when exposed to direct sunlight, or in approx. 2 minutes under fluorescent light (27W).
The Light-Curing Putty is a one-component putty so does not require any curing agent, realizing very…

Model
87076-000
TAMIYA PUTTY (BASIC TYPE)

Putty - Basic Type

Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. The putty is gray in color and may be applied with a flat surface tool. Note: Tamiya's basic type putty…

Model
87053-A00
Tamiya Putty (White) 32g

Description The currently available Tamiya Putty (Basic Type) has long been praised by modellers for its high quality and ease of use. However, it...s gray color sometimes made painting over it with a lighter color difficult. Tamiya now provides modellers with a white-colored putty to solve this problem. Useful for filling…

Model
87095-A00
Result Pages:
Quick Find
Manufacturers
We Accept
Store Information
Supercheap Hobbies
Shop 3 / 2 Old Coach Rd
Aldinga, SA, 5173
Ph: 08 8311 1151

Opening Hours
Mon - Fri 9am to 5pm
Thursday 9am to 6pm
Saturday 10am to 2pm
https://rektorat.lembahdempo.ac.id/account/print/v77slot/ https://rektorat.lembahdempo.ac.id/account/print/bizz77game/ https://techvcsconclave.jntua.ac.in/wp-content/plugins/v77slot/ https://techvcsconclave.jntua.ac.in/wp-content/plugins/bizz77game/ http://203.159.154.241/v77slot/ http://203.159.154.241/bizz77game/ https://www.unvime.edu.ar/v77slot/ https://www.unvime.edu.ar/bizz77game/ http://125.167.13.91/v77slot/ http://125.167.13.91/bizz77game/ v77slot