Result Pages:
View:
AIRCRAFT DOPE 250ML CAN

Model
ME651
AIRCRAFT DOPE 500ML CAN

Model
ME654
AIRCRAFT DOPE I LTR CAN

Model
ME652
BD37 Eze-cote 500ml

Laminating and finishing resin for balsa and foam models. Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy.
Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily…

Model
BD37
BD42 Eze Dope

250ml A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper. It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam.…

Model
BD42
BD48 WONDERFILL 240ML

240ml The next generation of strong lightweight fillers for foam and wood. An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers…

Model
DM-BD48
BD49 SAND N SEAL

Description: Sand 'n' Seal 250ml A specially formulated wood grain sealer. Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy. Stir well…

Model
DM-BD49
BD5 MODEL LITE FILLER WHITE 240CC

240ml pack, White. Strong, lightweight filler which sands easily. Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.…

Model
DM-BD5
BD50 Foam Armour 250g

Creates a hard durable surface layer on foam and wood.

A thick water based resin that sets to produce an attractive, durable, scratch resistant coating on foam to prevent dings, wear and disintegration.

It dries to a surface that…

Model
BD50
STIX-IT,HEAT ACT. ADHESIVE 16 OZ

SIG STIX-IT Heat Activated Covering Adhesive Easy to use Saves time Superior adhesion Allows economical covering materials to be iron-on Keeps iron-on plastic & fabric coverings stuck down Strengthens and seals the wood Low weight, one thin brushed-on coat is all that is necessary Cleans up with Sig Butyrate Dope Thinner Compatible with all common model airplane paints Stix-It is…

Model
SIGYSX002
STIX-IT,HEAT ACT. ADHESIVE 8 OZ

SIG STIX-IT Heat Activated Covering Adhesive


ò Easy to use
ò Saves time
ò Superior adhesion
ò Allows economical covering materials to be iron-on
ò Keeps iron-on plastic & fabric coverings stuck down

Model
SIGYSX001
TAMIYA PUTTY (BASIS TYPE)

Putty - Basic Type

Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. The putty is gray in color and may be applied with a flat surface tool. Note:…

Model
T87053
Result Pages:
Quick Find
Manufacturers
We Accept
Store Information
Supercheap Hobbies
Shop 3 / 2 Old Coach Rd
Aldinga, SA, 5173
Ph: 08 8311 1151

Opening Hours
Mon - Fri 9am to 5pm
Thursday 9am to 6pm
Saturday 10am to 2pm