Overview
The scale crawling playing field has changed now that the SCX10 III Jeep JT Gladiator RTR from Axial has arrived. Upgraded from the proven SCX10 platform, this RC Crawler offers a larger 355mm wheelbase to accommodate a more realistic body and a DIG function to get you up, over and through your favourite crawling obstacles.
Features
- 2.4GHz DX3 DSMR Spektrum radio provides advanced response, interference resistance, and, range, and is fully compatible with Spektrum Smart technology provided by the Spektrum Firma 40 ESC/Receiver
- 355mm wheelbase with longer frame rails and chassis allow for a more realistic Jeep JT Gladiator body
- Three-piece realistic Jeep JT Gladiator body that features injection-moulded scale parts including door handles, hood vents, bed rack, mirrors and more
- Transfer case cover and transmission housing protect the replica V8 engine, improve scale appearance and add forward-mounted weight
- Centred battery tray that accepts full-size NiMH or LiPo’s with side pod space to run smaller “shorty” LiPos
- Lock the rear axle from your transmitter with the DIG function which enables a tighter turning circle from front wheel drive
- Optional two-speed transmission that increases vehicle speed by around 40%
- Run DIG and two-speed transmission simultaneously with the addition of a micro servo and 4-channel receiver (sold separately)
- New AR45 Portal Axles have an offset front housing to add to the realistic looks, increase ground clearance and a universal that gives 45 degrees of steering
- Hypoid gears are included on the differential locker allowing for smaller size gears, improved gear reduction and reducing torque twist
- New O-ring material feature on the oil-filled shocks for a better seal and cap with bleed screw for easier rebuilds
- Stronger materials increase stiffness and durability
- Detailed interior and moulded driver that adds to the scale realism
- Simple body removal thanks to new rear body mounts
- 15kg, high torque metal geared waterproof servo allows you to drive confidently when the weather and conditions aren’t ideal
- Floor sides and inner fenders reduce visibility of internal components from the side
- Improved materials increase durability and stiffness while holding tighter tolerances to eliminate most “slop”.
- Metal stainless steel pivot balls at all suspension points increase durability and wear life for consistent handling.
- All-metal drive train components in the transmissions, portals and axle gears — with pinion gear included, the vehicle has 23 metal gears in total
- Remove and replace tyres with no glue with the 3-piece beadlock wheels
- Increased ground grip and clearance with taller officially licensed Nitto Trail Grappler tyres
- Improved suspension geometry reduces torque twist while allowing chassis fine-tuning
What you need
- Vehicle Battery (accepts standard and shorty packs)
- Compatible charger
Specs
Type "Scale" 4x4 Crawler
Completion Level Ready-to-Run
Scale 1/10
Length 22.25 in (565 mm)
Width 9.25 in (234 mm)
Height 9.5 in (241 mm)
Weight 7 lb (3.175 kg)
Ground Clearance 3 in (76.2 mm)
Wheelbase 14 in (356 mm)
Track 8.9 in (226 mm)
Front Track 8.9 in (226 mm)
Rear Track 8.9 in (226 mm)
Chassis Adjustable Steel C-channel
Suspension Multi-Link Solid Axle
Shock Type Oil-Filled/Coil-Over Spring
Drivetrain 4WD (locked front and rear)
Differential Locked
Wheel Type Injection Moulded 3-Piece Beadlock
Wheel Diameter 1.9 in (48.3 mm)
Wheel Width 1 in (25.5 mm)
Tyre Compound R35 (sticky)
Tyre Tread Nitto Trail Grappler M/T
Tyre Diameter 4.7 in (119 mm)
Motor Type Brushed
Motor Size 540
Pinion 14T
Gear Pitch 32-Pitch
Final Drive Ratio 45.6:1 Low / 31.3:1 High
Speed Control Included Y
Radio Spektrum
Servos Included Y
Body Polycarbonate
Ball Bearings Complete Vehicle
Experience Level Beginner
Recommended Environment All-Terrain
Is Assembly Required No
