Flex Innovations RV-8 70CC FLS ARF, Red/White/Blue

The first RC plane in the Flex Innovations FeatherLite Series (FLS) is the RV-8 70cc FLS. World Champion Quique Somenzini has taken a vastly different approach to design this aircraft giving pilots an airframe that is especially light but gives incredible versatility and an expansive flight envelope. This RC plane can be enjoyed by pilots of all skill levels.

Features

• 3D and F3A World Champion, Quique Somenzini, designed and developed
• Over 2000 square inches in wing area with a flying weight of only 10.4 kg’s. The equivalent of flying a 120cc aerobatic plane at only 2/3’s the weight
• Large deflections from huge control surfaces provide enormous manoeuvrability
• Easily transportable with a removable tail and vertical fin
• Airframe is set up to allow most 65cc or similar electric motor installations without the need for modifications
• Includes painted carbon fibre landing gear
• Easily access internal components through the large canopy hatch
• Optional float set can be easily installed to the float ready airframe
• Instrument panel and cockpit floor made from lightweight foam are included
• DA-70 pre-cut baffles are included
• Available in two different factory detailed colour schemes
• Turnbuckle style ball links and pushrods with turnbuckle wrench included
• Fuel engines from 60-70cc or equivalent electric motors such as the Potenza 65cc Brushless or the Desert Aircraft DA-70 can all be fitted
• 2 to 1 canister installs are easily accepted on the airframe
• Storage and transport are made easy with removable wings

Specs

Wingspan: 2540 mm (100 in.)

Length: 2288 mm (90 in.)

Gas Weight: 10.5 Kg (23 lb. 3 oz.)

Electric Weight: 11.3 Kg (Potenza 65cc w/12S 6200mAh)
24 lb. 15oz. (Potenza 65cc w/12S 6200mAh)

Engine/Motor Size: 60-70cc

Exhaust Recommendation (for DA-70): Slimline Stock Muffler Set
1 x MTW TDH 110 Canister w/KS 60mm Drop 2-to-1 Header

Servos Required: Minimum 7 for electric setups (Min. 200 oz./in. (14kg/cm) for ail, ele, flp)
Minimum 8 for gas setups (Min. 400 oz./in. (28kg/cm) for rudder)