E-Flite Park 300 BL Outrunner Motor, 1380Kv

Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g).

Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
High-torque, direct-drive alternative to inrunner brushless motors
Ideal for models requiring up to 85 watts of power
Integrated prop saver design
Mount, prop adapter and hardware included
External rotor design with 3.2mm shaft
Low noise level

Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g), or models requiring up to 85 watts of power.

8A–10A Brushless ESC

6–8 Ni-Cd/Ni-MH or 2–3S Li-Po

6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer

Type Brushless outrunner
Size 180/280 replacement
Bearings or Bushings Two 3.175 x 7.94 x 3.6mm Bearings
Recommended Prop Range 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
Voltage 7.2–11.1V
RPM/Volt (Kv) 1380
Resistance (Ri) .33 ohms
Idle Current (Io) .40A @ 8V
Continuous Current 7A
Maximum Burst Current 9A (15 sec)
Cells 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
Speed Control 8–10A brushless
Weight 24 g (.8 oz)
Overall Diameter 28mm (1.10 in)
Shaft Diameter 3.17mm (1/8 in)
Overall Length 22mm (.90 in)