Hitec HS-325HB Standard Heavy Duty Servo

Features

• Ball Bearing Output Shaft
• Karbonite Gears
• *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.

The HS-325HB Standard Heavy Duty Servo features a ball bearing output shaft for long life and positive centering. Hitec’s HS-325HB is offered with Karbonite gears, that after hundreds of thousands of cycles won’t show any signs of wear. With 49 oz-in of torque at 6 Volts, the 325HB is a great choice for Sport pilots all over the World!

Applications: Heli's and Aircraft up to 72” or up to 12lbs when using just one servo per control surface.

Note: Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.

Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.

Specs

Size Category Standard

Type Analog

Application 20-40 Size Aircraft, Steering and Throttle for Cars, Trucks, and Boats

Torque 41.7 oz-in (3.0kg-cm) @ 4.8V; 51.4 oz-in (3.7kg-cm) @ 6V

Speed 0.19 sec/60 deg @ 4.8V; 0.15 sec/60 deg @ 6V, at no load

Length 1.57 in (40.0mm)

Width 0.78 in (20.0mm)

Height 1.43 in (36.5mm)

Weight 1.51 oz (43.0g)

Bushing Or Bearing Bearing

Bearing Single

Motor Type 3 Pole

Connector Type Universal

Gear Material Karbonite

Current Draw Idle 7.4mA @ 4.8V; 7.7mA @ 6V

Current Draw Stall 700mA @ 7.4V; 800mA @ 6V

Voltage 4.8V to 6.0V

Deadband 5µs