Phoenix Model Edge RC Plane, .46 Size ARF

Features

• Designed for compatibility with both GP and EP flight
• Covered in genuine ORACOVER®
• Bolt on two piece wing for easy transport and setup at the field
• Removable canopy for easy change lipo battery and set up radio
• Strong Light Weight Construction
• High quality hardware package included

The Edge 540 is the most common aircraft used in the Red Bull Air Race World Series, in fact, all champions of the World Series have flown this aircraft.

Phoenix’s Edge 540 is naturally slower but is engineered to perform equally thrilling manoeuvres! The scale-like model is able to perform flat spin, knife edge and much other difficult aerobatics. The Edge 540 is expertly handcrafted from balsa and plywood using the only epoxy and CA glues. You can fly this plane after few hours of installation. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system.

Wingspan 1407mm (55.3 in)

Length 1353mm ( 3.2 in)

Flying weight 2800-3200 gr

Wing area 35.3 dm2

Wing loading 80g/dm2

Wing type Naca airfoils

Covering type Genuine ORACOVER®

Gear type Aluminum Hi-grade for main gear and spring wire for tail gear (included)

Spinner size Plastic 58mm (included)

Radio 4 channel minimum (not included)

Servo 5 standard servo2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)

Recommended receiver battery 4.8-6V / 800-1200mAh NiMH (not included)

Servo mount 21mm x 42 mm

Propeller suit with your engine

Engine .46-.55 / 2-stroke or .52/4-stroke glow engine (not included)

Motor brushless outrunner 1000-1400 W, 480 KV (not included)

Experience level Intermediate

Plane type Scale Aerobatic

RECOMMENDED MOTOR AND BATTERY SET UP

Motor RIMFIRE .46-.55 (not included)

Lipo cell 6 cells / 4000 – 5500mAh (not included)

Esc 50-80A (not included)

Box Size 4.3kg 101 x 32 x 22